- We Create, What You Imagine...
HDPE / PP / PP FRP Fabricated Products
HDPE / PP / PP FRP Fabricated Products
We are manufacturing and supplying of HDPE / PP / PP FRP Fabricated Products
Our range of industrial process equipment such as Storage Tanks, Scrubbing Systems, Centrifugal Blowers, Reactors, Vacuum Receivers, Notch Filters, Catch Pots, etc. were made with high quality materials like PP, FRP and HDPE sprial.
OUR PRODUCTS
- HDPE / PP Spiral Storage Tank
- HDPE / PP Spiral Vessel / Reactor
- PP FRP / FRP Storage Tanks
- HDPE / PP / FRP Vacuum Receiver Tank
- HDPE / PP Spiral Scrubber
- PP FRP / FRP Scrubber
- HDPE / PP Spiral Nutsche Filter
- HDPE / PP FRP / FRP / MS Blower
- HDPE / PP / PP FRP Ventury (Ejector)
- Pump
- Motor
- HDPE / PP / PP FRP Perforator Plate
- HDPE / PP / PP FRP Duct
- HDPE / PP / PP FRP Hood
- HDPE / PP / PP FRP Extrusion Sheet
- HDPE / PP / FRP Header
- FRP Roofing Sheet
- HDPE / PPRC / UPVC / PVC / FRP Pipes And Fittings
- HDPE / PP / PP FRP Fabricated Products
- Valve
- Engineering Products
- Engineering Machines
- FRP Stirrer/Agitator
HDPE / PP / PP FRP Fabricated Products
HDPE (High-Density Polyethylene), PP (Polypropylene), and PP FRP (Polypropylene Fiberglass Reinforced Plastic) fabricated products are specifically engineered solutions for industrial applications that require superior durability, chemical resistance, and high-performance standards. When used for Sunfiber and similar applications, these materials provide a unique combination of lightweight yet strong construction, making them ideal for demanding manufacturing, processing, and environmental systems.
PP(Polypropylene), also known as polyprotein, is a thermoplastic polymer possesses a good balance of properties that can be tailored to a wide range of production processes and applications in chemical process. Polypropylene has also been the material of choice to replace tanks and other vessels fabricated from specialty metals such as stainless steel because of reduced original cost and long term cost savings benefits over the life of the equipment.
HDPE, PP, and PP FRP fabricated products for Sunfiber represent a critical component in the overall efficiency, safety, and durability of industrial systems. Whether used for storage, filtration, piping, or custom engineering, these materials offer a range of advantages that make them suitable for a wide array of applications. Their combination of chemical resistance, high strength, and long-lasting performance makes them ideal for challenging industrial environments, ensuring that Sunfiber and similar industries can continue their operations effectively and sustainably.
Our range of industrial process equipment such as Storage Tanks, Scrubbing Systems, Centrifugal Blowers, Reactors, Vaccum Receivers, Nutch Filters, Catch Pots, etc. were made with high quality materials like PP, FRP and HDPE sprial.
features :
- Light weight with high strength
- Corrosion free and impact resistant
- Dimensional stability
- Electrically non-conductive
- Non-magnetic and non-sparking
- Low thermal conductivity
- Rapid installation with standard tools
- RF transparency
Application in Various Industries :
- Storage Tanks
- Scrubbers or Exhaust Systems (includes Palrings, Filter plates, etc...)
- Reactors
- Centrifugal Blowers devices
- Pressure Vessels
- Vacuum Receivers
- Vaccum Jets
- Nutch Filters
- Hoods
- Ducting (includes Diamper, Blends, Flanges, etc...)
- Tubs
- Impeller (with range of diameter size)
inquire here :
Varieties of HDPE / PP / PP FRP Fabricated Products
Reducing Tee
A Reducing Tee is a type of pipe fitting used in piping systems to connect three pipes of different sizes. It has one inlet and two outlets, allowing fluid or gas to flow from a larger pipe into a smaller pipe, or vice versa. The design of the reducing tee enables a smooth and efficient transition between pipes of different diameters while maintaining proper flow and pressure throughout the system.
Reducing tees are commonly used in various industrial, commercial, and residential applications, including water supply systems, chemical processing, HVAC systems, and oil & gas pipelines. They can be made from various materials such as HDPE, PP, PP FRP Fabricated Products and more, depending on the specific needs of the system, including factors like pressure, temperature, and the type of fluid being transported.
Reducing Bend
A Reducing Bend is a type of pipe fitting used in fluid and gas distribution systems to change the direction of the flow while simultaneously reducing the size of the pipe. It combines both a bend (typically at 90 or 45 degrees) and a reduction in diameter, allowing for a smooth transition from a larger pipe to a smaller one. This fitting is commonly used in various industrial and commercial applications, including plumbing, chemical processing, oil and gas, water treatment, and HVAC systems.
Reducing Pipe
A Reducing Pipe is a type of pipe fitting used to connect two pipes of different diameters. It allows for a smooth and efficient transition from a larger pipe to a smaller one, enabling the proper flow of fluids or gases within a piping system. The reducing pipe is designed to accommodate various flow requirements by seamlessly adjusting the pipe size, ensuring minimal turbulence and pressure drop during the transition.
Reducing pipes are commonly used in a variety of industries, such as plumbing, water treatment, chemical processing, oil and gas, and HVAC systems. They are available in a range of materials and sizes, depending on the specific application and environmental conditions.
Big Size Bend
A Big Size Bend is a type of pipe fitting used in large-scale piping systems to change the direction of fluid or gas flow. Typically designed for pipes with larger diameters, big size bends allow for smooth, efficient directional changes while minimizing turbulence and pressure loss within the system. These bends are especially crucial in industries that require the transport of large volumes of fluid, such as oil and gas, chemical processing, power plants, water treatment, and heavy industrial systems.
Big Size Tee
A Big Size Tee is a type of pipe fitting used in large-scale piping systems to connect three pipes of different sizes, typically at a 90-degree angle. This fitting allows for the branching off of a larger pipe to a smaller one, enabling the efficient distribution or redirection of fluids or gases. The “big size” designation refers to the larger diameter of the pipes the tee is designed to accommodate, often used in industries that handle high-flow applications, such as oil and gas, water treatment, chemical processing, and power generation.
Hopper
Vaccume Receiver Tank
A Vacuum Receiver Tank is an industrial container designed to collect and store materials or substances that are transported or conveyed using a vacuum system. These tanks are commonly used in a wide range of industries, including chemical processing, food processing, pharmaceuticals, plastics, and manufacturing. The vacuum receiver tank functions as a central collection point where materials, such as powders, granules, liquids, or even gases, are sucked into the tank via a vacuum system for further processing, storage, or transfer.